I removed the old ply, including several mini archaeological digs through layers of floor dust for screws deformed by years of corrosion.  The Metal van floor was then cleaned, rust treated and painted.  Battens went down with very strong grab adhesive and a few self-tapping screws [NB: Be very sure of location of spare tyre under van before using self-tappers…]  Old ply floor was used as a template for cutting a new one out of 12mm marine plywood.  Soon after these ‘test fit’ photos a coat of varnish went onto the ply and insulation was put between the battens before fixing in place for good.12mm plywood floor in van conversion for campervan12mm plywood floor in van conversion for campervan

EnregistrerEnregistrer

EnregistrerEnregistrer

Categories:

Feta from Vansformation

Chief Rabble Rouser at Vansformation